V2 Software Support

 Must read before use

1. All positions of the v2 machine have been preset before leaving the factory. Please do not manipulate the screen to modify any parameters at will.
2. The clamp of the new machine will be in a clamped state. When using it, you need to loosen the clamp through screen control first. Please do not open it with your hands.
3. The machine does not require additional parameters to be set.
4. Please be sure to follow the usage instructions below.
5. After receiving the machine, give priority to using the back cover included in the package for testing. If the laser path is inaccurate, please do not start removing glue.
6. Please be sure to give priority to the drawings of the corresponding color for glue removal.
7. Be sure to connect the filter correctly
8. If there are no problems during the test, please install a plexiglass shell, which can make the machine quieter and more conducive to the exhaust system.
9. If you encounter any problems, please contact customer service as soon as possible and we will help you solve all problems perfectly.
About Software Updates
We will provide updates to the drawings and software free of charge, and we will also give away new molds for free (excluding shipping costs). If you have any suggestions and tool needs, you can give us feedback through our customer service, and we will respond as soon as possible.

 

Caution: Please place the phone flat in the fixture of the machine before use. As shown in the picture below:

Please Download and Follow the User Manual to install and use

V2 User Manual

Please downlaod the Newest user manual

Download

Iphone 8-15 Series Drawing files

Please follow below steps to update:

1. Remove the memory card from the machine and insert it into the computer with WIN system, not compatible with Mac system.
2. Copy the file to the memory card
3. Then, reinsert the memory card with the updated files back into the machine and it is ready for normal use.

Download

How to update drawings from your Win PC

SRWOR Creative Software

The V2 Laser machine can engrave on various materials like coated metals, plastics, aluminum oxide, stainless steel, leather, and wood.

When using the laser machine for engraving, it's recommended to use a fan to blow away dust and prevent damage to the laser module. Please note that the previous air filter was mainly for repairing mobile phones.

Only support SRWOR software, not Compatible with Lightburn and laserGRBL

Download

SRWOR Creative Software Installation

How to use SRWOR software to engraver

How to Install and use V2 phone back glass laser